Van Flooring: Vinyl Planks, Woven Vinyl and PVC Compared
As an Amazon Associate I earn from qualifying purchases. Some links on this page earn us a small commission, at no extra cost to you. Full disclosure.
Compare the covering with its approved substrate and installation requirements before choosing the finish. This guide covers wood-look planks, woven vinyl and a coin-pattern PVC roll.
Quick answer
Art3d offers self-adhesive wood-look planks, while RecPro lists felt-backed woven vinyl for RV and marine applications. Rubber-Cal lists Coin-Grip for vans. Choose the covering together with its substrate, adhesive and complete floor assembly.
All 3 picks at a glance

Art3d Peel and Stick Vinyl Planks
A 36-plank pack of 6 by 36 inch vinyl planks covers 54 sq ft. Read more

RecPro Woven Vinyl Flooring
RecPro specifies 140 mil woven vinyl with felt backing. Read more

Rubber-Cal Coin-Grip
Rubber-Cal lists the 2 mm Coin-Grip roll for vans, trailers and RVs. Read more
How we compared them
This comparison covers manufacturer descriptions, model specifications and installation requirements. The figures do not guarantee performance in a particular vehicle or boat.
Plan the covering and the floor underneath

Check the covering requirements against the planned vehicle floor. A flooring product page does not specify structural fixings or furniture anchor points. Keep those decisions with the vehicle's build requirements instead of treating the finish as approval for the construction beneath it.
Count the complete floor assembly when planning standing room. Check the flooring instructions before deciding how it meets cabinets and other fixed components. The covering thickness alone does not describe the space taken by the whole floor.
Coverings and installation limits
| Covering | Verified format | Planning limit |
|---|---|---|
| Art3d planks | Verified format: 36 planks, 6 by 36 inches, 54 sq ft | Planning limit: Waterproof planks do not make a watertight assembly |
| RecPro woven vinyl | Verified format: 140 mil, 8 ft 6 inch width, felt backing | Planning limit: Specified adhesive and installation requirements |
| Rubber-Cal Coin-Grip | Verified format: 2 mm PVC roll | Planning limit: Cleaning and fixing instructions apply |
Follow the product and installation guidance from Art3d, RecPro and Rubber-Cal.
Art3d Peel and Stick Planks: Wood-Look Vinyl

Art3d Peel and Stick Vinyl Planks
Art3d describes these self-adhesive vinyl planks as waterproof. The stated pack contains 36 planks measuring 6 by 36 inches and covers 54 sq ft. Use the pack coverage when planning quantities and allow for the cuts required by your layout.
Confirm vehicle temperatures, substrate and preparation with Art3d. The adhesive backing does not remove the need for a suitable surface. Waterproof planks do not establish a watertight floor, particularly where the complete assembly includes joints and edges.
What could be better: The waterproof claim applies to the planks, not a sealed floor assembly. Their self-adhesive format still depends on an approved substrate and preparation.
RecPro Woven Vinyl: Felt-Backed Flooring

RecPro Woven Vinyl Flooring
RecPro woven vinyl is specified as 140 mil marine-grade vinyl with felt backing and an 8 ft 6 inch width. RecPro describes the surface as soft and slip resistant. Follow its water-based adhesive instructions and compare the ordered length with your floor measurements.
Order the required length and the specified adhesive or installation kit. Check what the selected package includes before ordering tools separately. The roll width does not by itself establish that one piece will fit every van floor.
What could be better: This felt-backed flooring needs the specified adhesive and installation method. Its limited warranty has installation and use exclusions.
Rubber-Cal Coin-Grip: PVC Coin-Pattern Roll

Rubber-Cal Coin-Grip
Rubber-Cal Coin-Grip is a 2 mm PVC coin-pattern roll. Match the selected width and length to the floor measurements. Its listed vehicle applications offer a starting point, but the exact size and fitting method still determine the installation.
Rubber-Cal lists tape for temporary installation or CX-941 adhesive. Follow its installation instructions for the intended use. Its care guidance advises against bleach and caustic cleaners, so include the cleaning requirements when comparing finishes.
What could be better: Cleaning products need to follow Rubber-Cal's restrictions on bleach and caustic cleaners. A taped temporary installation is also a different choice from the specified adhesive method.
Which covering fits the floor plan?
Choose by application, substrate and dimensions. Art3d provides the wood-look plank format, RecPro a felt-backed woven roll, and Coin-Grip a coin-pattern PVC surface.
Check the maker's requirements for the surface under the covering before choosing. Measure the full floor shape, decide how the finish meets fixed components and plan the structural floor separately. The beginner conversion guide below covers the wider build decisions. Before the floor: van insulation and cargo van conversion for beginners.

- Check the complete floor assembly and installation requirements before ordering.
- Art3d's stated 36-plank pack covers 54 sq ft.
- RecPro specifies 140 mil woven vinyl with felt backing and warranty exclusions.
- Rubber-Cal lists 2 mm PVC Coin-Grip for vehicle applications.
FAQ
What flooring should I use in a camper van?
Start with intended use, substrate and installation requirements. Then compare the exact ordered dimensions with your floor plan. A material description alone does not establish a complete compatible vehicle floor.
What should go under the floor covering?
Plan the structural floor and furniture fixings using vehicle-specific guidance, separately from the covering. Follow the selected covering's requirements for the substrate and preparation.
Can I use peel and stick planks in a van?
Art3d describes these planks as self-adhesive and waterproof. Confirm the intended vehicle temperatures, approved substrate and preparation with Art3d before specifying the installation.
How thick should the van floor be?
Count the whole assembly when planning headroom. Rubber-Cal specifies 2 mm for Coin-Grip and RecPro 140 mil for this woven vinyl. Those covering figures do not determine the thickness of the structural floor.
Affiliate disclosure. This post contains affiliate links. If you click and buy something, this site earns a small commission at no extra cost to you. Product details are based on manufacturer specifications and installation guidance. As an Amazon Associate I earn from qualifying purchases. Read the full affiliate disclosure. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
Your next step










