Van Insulation: Thinsulate, Reflectix and Dynaliner Compared
As an Amazon Associate I earn from qualifying purchases. Some links on this page earn us a small commission, at no extra cost to you. Full disclosure.
Van insulation materials do different jobs. Compare the purpose of each layer before deciding what belongs behind the lining.
Quick answer
SM600L is vehicle acoustic insulation, Reflectix is reflective bubble insulation, and Dynaliner is self-adhesive foam for automotive heat control. Choose by the job required, available thickness and installation instructions. These are not interchangeable layers.
All 3 picks at a glance

3M Thinsulate SM600L
Polyester and polypropylene fibres that 3M describes as resistant to moisture, mold and mildew. Read more

Reflectix BP24025
Two reflective film layers and two polyethylene bubble layers, 5/16 inch thick. Read more

Dynamat Dynaliner 1/2 Inch
Closed-cell foam for automotive heat control, supplied here in a 1/2 inch sheet. Read more
How we compared them
This comparison covers manufacturer descriptions, model specifications and installation requirements. The figures do not guarantee performance in a particular vehicle or boat.
What each insulation layer is for

Choose a layer for its intended job, then check its thickness, fixing method and fit within the planned build. A hydrophobic material is one property of a product. It does not establish that the surrounding wall, roof or floor assembly will stay dry.
Reflectix ties its stated insulation benefits to specific installations. A published figure for one assembly is not a rating for every place you might fit the material. For the separate job of panel-vibration treatment, see the van sound deadening guide.
The three materials side by side
| Material | Form | Listed thickness | Planning limit |
|---|---|---|---|
| 3M SM600L | Form: Polyester and polypropylene fibre | Listed thickness: 42 mm | Planning limit: Acoustic specification is not a completed-wall thermal rating |
| Reflectix BP24025 | Form: Reflective bubble roll | Listed thickness: 5/16 inch | Planning limit: R-values depend on the specified installation |
| Dynaliner | Form: Self-adhesive closed-cell foam | Listed thickness: 1/2 inch | Planning limit: One sheet covers 12 sq ft before cuts |
Follow the product and installation guidance from 3M, Reflectix and Dynamat.
3M Thinsulate SM600L: Hydrophobic Acoustic Insulation

3M Thinsulate SM600L
3M Thinsulate SM600L combines polyester and polypropylene fibres. 3M lists a thickness of 42 mm and describes the fibres as hydrophobic and resistant to moisture, mold and mildew. Measure the surfaces before selecting a roll size, rather than assuming one roll covers a van.
3M recommends checking application suitability with its Acoustic Solutions technical service team. Keep the material's intended acoustic role separate from the thermal performance required of the finished wall. Its moisture-resistance description is not a promise about the condition of surrounding metal, fixings or lining.
What could be better: The listed 42 mm thickness takes space within the assembly. Its acoustic specifications do not establish the thermal performance of a finished van wall.
Reflectix BP24025: Reflective Bubble Insulation

Reflectix BP24025
Reflectix BP24025 is a 24 inch by 25 foot roll. Reflectix describes two 96% reflective film layers bonded to two polyethylene bubble layers, with a total thickness of 5/16 inch. Reflectivity is a material specification, not the R-value of a completed van.
Reflectix publishes installation-specific R-values. A rating for a house assembly should not be used as the rating for a van wall or window cover. Follow the instructions for the intended application rather than choosing the roll from its reflective appearance alone.
What could be better: Its published assembly ratings cannot be transferred directly to a van wall or window cover. It does not provide a stand-alone thermal specification for your vehicle.
Dynamat Dynaliner 1/2 Inch: Self-Adhesive Foam

Dynamat Dynaliner 1/2 Inch
Dynamat Dynaliner is self-adhesive closed-cell foam. The 1/2 inch version comes as one 32 by 54 inch sheet covering 12 sq ft. Use those dimensions when planning the surfaces and the number of sheets.
Allow for cuts as well as the measured area. Dynamat specifically recommends Dynaliner over Dynamat Xtreme. That recommendation does not establish compatibility with every other damping mat, adhesive or layer in a build.
What could be better: One sheet covers 12 sq ft before cutting waste. The 1/2 inch thickness also needs room in the assembly, and the stated Xtreme pairing is not approval for every other mat.
Which material fits the planned assembly?
Start with the job required and the space available. SM600L brings vehicle acoustic absorption, Reflectix brings an installation-dependent reflective material, and Dynaliner brings self-adhesive closed-cell foam. These products do not provide a complete insulation specification for every van.
Plan the layers and retain access to wiring and service points before closing the panels. Use the sound-deadening comparison for vibration mats and the conversion guide for the wider build plan. Treat those as separate decisions rather than expecting one product to solve every part of the assembly. Next steps: van sound deadening and cargo van conversion for beginners.
- These specifications do not establish a thermal ranking for a completed van.
- 3M describes SM600L fibres as hydrophobic and resistant to moisture, mold and mildew.
- Reflectix ratings depend on the specified installation.
- The 1/2 inch Dynaliner sheet covers 12 sq ft before cuts.

FAQ
What is the best insulation for a camper van?
Match the material to its intended job and the planned assembly. This comparison does not establish a single best choice or a thermal ranking for complete van walls.
Is Reflectix enough to insulate a van?
Its published house-assembly ratings cannot be transferred directly to a vehicle. Decide the required performance and installation before assigning it a role in the van.
Does 3M Thinsulate get wet?
3M describes SM600L as hydrophobic and resistant to moisture, mold and mildew. This does not establish that the surrounding van assembly will stay dry.
Do I need sound deadening before insulation?
A damping mat is a separate panel-vibration treatment, not a universal requirement established here. Dynamat recommends Dynaliner over Dynamat Xtreme. Follow the instructions for the particular materials being combined.
Affiliate disclosure. This post contains affiliate links. If you click and buy something, this site earns a small commission at no extra cost to you. Product details are based on manufacturer specifications and installation guidance. As an Amazon Associate I earn from qualifying purchases. Read the full affiliate disclosure. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
Your next step










