A white cargo van inside a workshop with its side door open during a van build

Van Sound Deadening: Three Butyl Mat Packs Compared

As an Amazon Associate I earn from qualifying purchases. Some links on this page earn us a small commission, at no extra cost to you. Full disclosure.

These three packs treat panel vibration. Compare the selected pack sizes and installation requirements before deciding how much material to order.

Quick answer

Compare pack coverage with the area you intend to treat: Dynamat Squared covers 18 sq ft, Second Skin CLD Tiles 15 sq ft and Kilmat 80 mil 36 sq ft. Sheet format, added weight and installation requirements matter alongside coverage. None of those figures establishes a noise-reduction ranking for a finished van.

All 3 picks at a glance

Dynamat Xtreme Squared 18 pack of sound deadening sheets
18 sq ft pack

Dynamat Xtreme Squared 18 Pack 10420

Eight square sheets with a printed cutting grid. Read more

Get yours on Amazon
Second Skin Damplifier Pro sound deadening mat sheet
Published temperature range

Second Skin Damplifier Pro CLD Tiles

Second Skin specifies butyl without asphalt or fillers and a temperature range of -75 F to 450 F. Read more

Get yours on Amazon
Kilmat 80 mil sound deadening mat being rolled onto a panel
36 sq ft pack

Kilmat 80 Mil, 36 sq ft

34 smaller sheets with an embossed foil installation indicator. Read more

Get yours on Amazon

How we compared them

This comparison covers manufacturer descriptions, model specifications and installation requirements. The figures do not guarantee performance in a particular vehicle or boat.

What a damping mat does

In short: A damping mat treats panel vibration. It is not a complete thermal or airborne-noise solution.
Inside a camper van with panelled walls, a bed platform and windows open to a field
Inside a camper van with panelled walls, a bed platform and windows open to a field. Photo: Balkan Campers on Unsplash

The makers describe these mats as panel-vibration treatments. Follow the product instructions for preparation, placement and rolling. Do not choose a pack on the assumption that treating every surface is necessary or that a mat stops all vibration.

For airborne road noise, Second Skin recommends pairing Damplifier Pro with Luxury Liner Pro. A vibration mat alone is not a complete noise-control system. See the van insulation guide for the separate material comparison, rather than treating foam, fibre and damping mats as interchangeable.

The three selected packs side by side

ProductCoverageSheet formatInstallation consideration
Dynamat Xtreme Squared 10420Coverage: 18 sq ftSheet format: Eight 18 by 18 inch sheetsInstallation consideration: Room temperature or warmer
Second Skin CLD TilesCoverage: 15 sq ftSheet format: Eighteen 12 by 10 inch tilesInstallation consideration: Listed material weight 0.70 lb per sq ft
Kilmat 80 milCoverage: 36 sq ftSheet format: Thirty-four 400 by 250 mm sheetsInstallation consideration: Roller not included

Follow the product and installation guidance from Dynamat, Second Skin and Kilmat.

Dynamat Xtreme Squared 10420: Eight Square Sheets

In short: Eight 18 by 18 inch sheets provide 18 sq ft of coverage.
Dynamat Xtreme Squared 18 pack of sound deadening sheets
18 sq ft pack

Dynamat Xtreme Squared 18 Pack 10420

Get yours on Amazon

Dynamat Xtreme Squared 18 Pack is maker part 10420. Despite the pack name, it contains eight sheets, not eighteen. Each sheet measures 18 by 18 inches, with a 1 inch cutting grid. The pack covers 18 sq ft.

Use the sheet format and measured treatment area to plan cuts. Dynamat says the mat and fitting surface should be at room temperature or warmer during installation. A cold van therefore needs suitable installation conditions before the sheets are fitted.

What could be better: The pack covers 18 sq ft before cutting waste. Dynamat's room-temperature installation requirement also limits fitting in a cold workspace.

Second Skin Damplifier Pro CLD Tiles

In short: A smaller tile format with published weight and temperature specifications.
Second Skin Damplifier Pro sound deadening mat sheet
Published temperature range

Second Skin Damplifier Pro CLD Tiles

Get yours on Amazon

Second Skin Damplifier Pro CLD Tiles use 2 mm butyl material without asphalt or fillers and an annealed foil layer. Second Skin gives a temperature range of -75 F to 450 F. These are manufacturer specifications, not evidence that this mat produces the quietest van.

The selected pack contains 18 tiles covering 15 sq ft. Second Skin specifies 12 by 10 inch tiles and 0.70 lb per sq ft. Account for that material weight as well as the number of packs when deciding the area to treat.

What could be better: At 0.70 lb per sq ft, treating a larger area adds material weight. The 15 sq ft pack also covers less area than either of the other selected packs.

Kilmat 80 Mil: 36 sq ft in Smaller Sheets

In short: The selected box offers 36 sq ft in a 400 by 250 mm sheet format.
Kilmat 80 mil sound deadening mat being rolled onto a panel
36 sq ft pack

Kilmat 80 Mil, 36 sq ft

Get yours on Amazon

Kilmat 80 mil provides 36 sq ft in 34 sheets. The specified thickness is 2 mm. Its embossed foil acts as an installation indicator when rolled, so follow the maker's rolling instructions rather than leaving pieces loosely pressed into place.

Each sheet measures 400 by 250 mm. A broad continuous area needs more individual pieces than it would with larger sheets. A roller is not included in this kit, so include the required fitting tool in the installation plan.

What could be better: Smaller sheets mean more individual pieces to position across a broad panel. The kit does not include a roller.

Which mat pack should you choose?

Start with the area to treat and the weight you can add. Compare the selected packs, then follow each maker's preparation and installation instructions. An 18 sq ft square-sheet pack, a 15 sq ft tile pack and a 36 sq ft small-sheet pack are different quantities, not a performance ranking.

Plan thermal insulation and airborne-noise treatment separately. Before fitting the lining, use the conversion, wiring and inverter guides below to plan the other systems around the treated panels. A mat pack does not decide their installation requirements. Building a van? Start with our cargo van conversion for beginners guide.

A van with its side door open and the inside fitted with shelves and tools
A van with its side door open and the inside fitted with shelves and tools. Photo: X F on Unsplash
Key takeaways
  • Damping mats reduce panel vibration.
  • The selected packs cover 18, 15 and 36 sq ft respectively.
  • Dynamat specifies room temperature or warmer for the mat and fitting surface.
  • Plan vibration treatment and thermal insulation as separate parts of the build.

FAQ

Do I need sound deadening in a camper van?

The choice depends on the panels and the result required. Follow the maker instructions rather than assuming a mat is mandatory for every conversion.

Is a butyl mat the same as insulation?

Vibration damping, heat insulation and airborne-noise treatment serve different jobs. Do not assume one foam or fibre layer replaces every other layer.

How many boxes do I need for a van?

Measure the area you plan to treat, then divide by the selected pack coverage: Dynamat 18 sq ft, Second Skin 15 sq ft or Kilmat 36 sq ft. Allow for cuts before rounding up to full packs.

Can I install it in cold weather?

Dynamat says the mat and surface should be at room temperature or warmer. Bring both to the required temperature before fitting and follow its rolling instructions.

Affiliate disclosure. This post contains affiliate links. If you click and buy something, this site earns a small commission at no extra cost to you. Product details are based on manufacturer specifications and installation guidance. As an Amazon Associate I earn from qualifying purchases. Read the full affiliate disclosure. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.

Your next step

Cargo Van Conversion for Beginners: 5 StepsCargo Van Conversion for Beginners: 5 Steps How to Wire a Camper Van: Fuse Block, Cables and LightsHow to Wire a Camper Van: Fuse Block, Cables and Lights Best Inverter for Camper Van: 4 Models ComparedBest Inverter for Camper Van: 4 Models Compared

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *